PM-DC – EV Drives https://staging.evdrives.com Home Page Wed, 13 Aug 2025 17:20:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://staging.evdrives.com/wp-content/uploads/2025/07/evdriveslogo11_1597197500__32796-150x60.webp PM-DC – EV Drives https://staging.evdrives.com 32 32 Motenergy ME-1602 Brush-Type Permanent Magnet DC Motor https://staging.evdrives.com/product/motenergy-me-1602-brush-type-permanent-magnet-dc-motor/ Wed, 13 Aug 2025 17:20:10 +0000 https://staging.evdrives.com/?post_type=product&p=392457 Read more]]> The ME1602 is the same motor as ME1004 but with a shorter 7/8ths shaft. This is the same motors as the ME0708 but it has a double brush set to handle 200 amps continuous. This is a Permanent Magnet, Brush Type, DC Motor with Neodymium Iron Boron Magnets.

Power 6.4 KW continuous @ 48V
16 KW for 1 minute @48V
Voltage 24 – 48 Volts
Speed 3360 rpm at 48V Unloaded
Size 8″ OD, 6.4″ long (w/o shaft)
Shaft 7/8″ x 2.3″, 3/16″ key shaft
Timed for counter-clockwise rotation (can be changed to clockwise)
Weight 30 lbs.
]]> Motenergy ME-0907 Brushless DC Permanent Magnet Motor https://staging.evdrives.com/product/motenergy-me-0907-brushless-dc-permanent-magnet-motor/ Mon, 11 Aug 2025 15:01:30 +0000 https://staging.evdrives.com/?post_type=product&p=392443 Read more]]> This three-phase motor requires a motor controller (Sevcon Gen4 or Kelly controllers) that we currently do not offer.

Features include:

  • Designed for long life. No brush maintenance. The motor is 90% efficient at voltages between 24 to 48 VDC. Continuous current of 100 amps at 48 VDC. This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap.
  • This is a 8 pole motor (4 pole pairs).
  • The Phase to Phase winding resistance is 0.013 Ohms.
  • The maximum recommended rotor speed is 5000 RPM.
  • Voltages from 0 to 72 VDC input to the control.
  • Torque constant of 0.13 Nm per Amp
  • The Inductance Phase to Phase is 0.10 Milli-Henry.
  • Armature Inertia is 52 Kg Cm Squared.
  • Continuous current of 80 Amps AC.
  • Peak current of 220 Amps AC for 1 minute.
  • Weight of 22 pounds.
  • Peak Stall Torque if 38 Nm.
  • This is an Open Frame, Fan Cooled motor.
  • Has internal temperature sensor.
  • Timed for counter-clockwise rotation (can be changed to clockwise)

    Note: This is a direct replacement for the Motenergy Electric LLC ME0201013001 Motor. The only difference is that the ME0907 has an internal temperature sensor.

]]> Replacement Brush Holder with Brushes for ME0708 & ME0709 https://staging.evdrives.com/product/replacement-brush-holder-with-brushes-for-me0708-me0709/ Sat, 09 Aug 2025 17:36:52 +0000 https://staging.evdrives.com/?post_type=product&p=392441
  • Brush Holder for the ME0708 and ME0709 motors. Comes complete with a new holder, 8 brushes fully assembled and 8 new springs
  • Easy to assemble to the motor without disturbing the motor’s bearings.
    • ]]>         Replacement Brush Holder with Brushes for ME0909 Motor https://staging.evdrives.com/product/replacement-brush-holder-with-brushes-for-me0909-motor/ Sat, 09 Aug 2025 17:36:52 +0000 https://staging.evdrives.com/?post_type=product&p=392448
  • Brush Holder Assembly for the ME0909 Brush-Type Permanent Magnet Direct Current Motor.
  • Includes the plastic assembly, 6 brushes, and 6 springs.
    • ]]>         Motenergy ME-0708 (ME1907) Brush-Type Permanent Magnet DC Motor https://staging.evdrives.com/product/motenergy-me-0708-me1907-brush-type-permanent-magnet-dc-motor/ Sat, 09 Aug 2025 17:31:30 +0000 https://staging.evdrives.com/?post_type=product&p=392439 Read more]]> This ME0708 is a Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW continuous and 15 KW for 1 minute. For voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 1 minute).

    Also know as ME1907

    Power 4.8 KW continuous and 15 KW for 1 minute
    Voltage 24-48 Volts
    Speed 3360 rpm at 48V Unloaded
    Size 8″ OD, 5.5″ long (w/o shaft)
    Shaft 7/8″x 1-5/8″, 3/16″ key
    Timed for counter-clockwise rotation (can be changed to clockwise)
    Weight 28 lbs.

    We recommend that if you are getting an SR controller to get the SR48400 that is turned down to 75% power output. Because the ME0708 has such a low inductance, the controller sees the motor as if it was a short circuit. By having this large controller, it can withstand this low inductance. You will also need to use a contactor that is rated for 200 amp continuous like the MZJ-200D with the appropriate diode & pre-charge resistor.

    ]]>         Motenergy ME-1812 Brush-Type Permanent Magnet DC Motor for 12 & 24 Volts https://staging.evdrives.com/product/motenergy-me-1812-brush-type-permanent-magnet-dc-motor-for-12-24-volts/ Sat, 09 Aug 2025 17:31:29 +0000 https://staging.evdrives.com/?post_type=product&p=392459 Read more]]> This ME1812 is a Brush-Type, Permanent Magnet DC motor with high efficiency.

    • 12 to 24 volt
    • 1.1 KW @ 12VDC
    • 2.5 KW at 24 volts
    • 1,800 rpm at 12V
    • 3,600 rpm at 24V
    • Weight of 20 Lbs
    • Size 6.88″ OD, 5.83″ long (w/o shaft)
    • Shaft is 7/8″x 1-5/8″, 3/16″ key
    • Timed for counter-clockwise rotation (can be changed to clockwise)

     

    Size 6.88″ OD, 6.29″ long (w/o shaft)
    Shaft 7/8″x 1-5/8″, 3/16″ key
    Timed for counter-clockwise rotation (can be changed to clockwise)
    Weight 24.1 Lbs.
    ]]>         Open Box, Motenergy ME-0909 Brush-Type Permanent Magnet DC Motor https://staging.evdrives.com/product/open-box-motenergy-me-0909-brush-type-permanent-magnet-dc-motor/ Sat, 09 Aug 2025 17:31:29 +0000 https://staging.evdrives.com/?post_type=product&p=392554 Read more]]> Open Box. This ME0909 is a Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW continuous and 15 KW for 30 seconds. For voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 30 seconds). Designed for battery operated equipment.

    Power 4.8 KW continuous 15KW for 30 seconds
    Voltage 12 – 48 Volts
    Speed 3,984 rpm at 48V Unloaded
    83 RPM per Volt
    Size 6.88″ OD, 6.29″ long (w/o shaft)
    Shaft 7/8″x 1-5/8″, 3/16″ key
    Timed for counter-clockwise rotation (can be changed to clockwise)
    Weight 24.1 Lbs.
    ]]>         Pre-Installed Motenergy ME-0708 Brush-Type Permanent Magnet DC Motor https://staging.evdrives.com/product/pre-installed-motenergy-me-0708-brush-type-permanent-magnet-dc-motor/ Sat, 09 Aug 2025 17:31:29 +0000 https://staging.evdrives.com/?post_type=product&p=392568 Read more]]> Pre-Installed ME0708, has some marks on the mounting face from a sharpy and mounting.

    This ME0708 is a Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW continuous and 15 KW for 1 minute. For voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 1 minute).

    Power 4.8 KW continuous and 15 KW for 1 minute
    Voltage 24-48 Volts
    Speed 3360 rpm at 48V Unloaded
    Size 8″ OD, 5.5″ long (w/o shaft)
    Shaft 7/8″x 1-5/8″, 3/16″ key
    Timed for counter-clockwise rotation (can be changed to clockwise)
    Weight 28 lbs.

    We recommend that if you are getting an SR controller to get the SR48400 that is turned down to 75% power output. Because the ME0708 has such a low inductance, the controller sees the motor as if it was a short circuit. By having this large controller, it can withstand this low inductance. You will also need to use a contactor that is rated for 200 amp continuous like the MZJ-200D with the appropriate diode & pre-charge resistor.

    ]]>         Motenergy ME-0709 (ME1908) Brush-Type Permanent Magnet DC Motor https://staging.evdrives.com/product/motenergy-me-0709-me1908-brush-type-permanent-magnet-dc-motor/ Sat, 09 Aug 2025 17:31:29 +0000 https://staging.evdrives.com/?post_type=product&p=392440 Read more]]> The ME0709 is a Brush-type Permanent Magnet DC motor. Light weight, high efficiency design. Designed for 24-72 VDC battery operated equipment. Capable of 300 amps peak and 125 amps continuous. Totally open, fan cooled motor. Motor weight of 36 pounds. Similar in performance to the Perm-132 and the Lemco LEM-200 motors.

    Power 8 continuous & 18 Peak Hp
    Voltage 24-72 Volts
    Speed 3050 rpm at 72V Unloaded
    Size 8″ OD, 6.75″ long (w/o shaft)
    Shaft 7/8″x 1-5/8″, 3/16″ key
    Timed for counter-clockwise rotation (can be changed to clockwise)
    Weight 36 lbs

     

    Alternative part number with sproket – ME1908.

    ]]>         Motenergy ME0909 (ME1906) Brush-Type Permanent Magnet DC Motor https://staging.evdrives.com/product/motenergy-me0909-me1906-brush-type-permanent-magnet-dc-motor/ Sat, 09 Aug 2025 17:31:29 +0000 https://staging.evdrives.com/?post_type=product&p=392444 Read more]]> This ME0909 is a Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW continuous and 15 KW for 30 seconds. For voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 30 seconds). Designed for battery operated equipment.

    Alos know as ME1906

    Power 4.8 KW continuous 15KW for 30 seconds
    Voltage 12 – 48 Volts
    Speed 3,984 rpm at 48V Unloaded
    83 RPM per Volt
    Size 6.88″ OD, 6.29″ long (w/o shaft)
    Shaft 7/8″x 1-5/8″, 3/16″ key
    Timed for counter-clockwise rotation (can be changed to clockwise)
    Weight 24.1 Lbs.
    ]]>