MOTORS – EV Drives https://staging.evdrives.com Home Page Thu, 14 Aug 2025 00:21:56 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://staging.evdrives.com/wp-content/uploads/2025/07/evdriveslogo11_1597197500__32796-150x60.webp MOTORS – EV Drives https://staging.evdrives.com 32 32 AMD (Advanced) Golf Cart Motor 3267, E-Z-Go (Sepex) DCS & PDS https://staging.evdrives.com/product/amd-advanced-golf-cart-motor-3267-e-z-go-sepex-dcs-pds/ Wed, 13 Aug 2025 17:20:11 +0000 https://staging.evdrives.com/?post_type=product&p=392318 Read more]]> Features include:

  • E-Z-Go DCS & PDS Sepex Motor
  • 4.45 Hp, 3750 RPM at 36 VDC
  • Can also be used with 48 VDC
  • 19 Tooth Female Spline

The speed sensor plug on this motor does not match the E-Z-GO PDS motor. Use cable # NP-3228 with OEM and GE controllers. NP-3228 is not needed with the Alltrax controllers. 

Cross Reference Part Numbers: ADVANCED MOTORS DE2-4007 ADVANCED MOTORS EV6-4001
FOREPAR EV6-4001

Best Practice Before Buying: remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.
]]> AMD (Advanced) Golf Cart Motor EJ8-4001A (3258) Club Car IQ / Precedent & PD Plus (SepEx), Stock https://staging.evdrives.com/product/amd-advanced-golf-cart-motor-ej8-4001a-3258-club-car-iq-precedent-pd-plus-sepex-stock/ Wed, 13 Aug 2025 17:20:11 +0000 https://staging.evdrives.com/?post_type=product&p=392315 Read more]]>
Features include:
  • Club Car SepEx Motor
  • 3.2 Hp at 48 VDC
  • 10 Tooth Female Spline
For IQ stock replacement. When used with an Alltrax XCT48300 or XCT48400 controller, this motor can be used on an IQ / Pecedent, PD Plus.

Cross Reference Part Numbers:

ADVANCED MOTORS EJ8-4001A
ADVANCED MOTORS EJ4-4004
ADVANCED MOTORS EX9-4002
CLUB CAR 1035725101
CLUB CAR 102705001

CLUB CAR 5BC59JBS6365


Best Practice Before Buying: remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.
]]> AMD 48V Stock Replacement for DV1-4001, PDS/DCS E-Z-GO https://staging.evdrives.com/product/amd-48v-stock-replacement-for-dv1-4001-pds-dcs-e-z-go/ Wed, 13 Aug 2025 17:20:11 +0000 https://staging.evdrives.com/?post_type=product&p=392320 Product Description:

  • SepEx Motor with Regen
  • AMD 48V Stock PDS/DCS Shunt Replacement Motor For E-Z-GO
  • Fits E-Z-GO PDS Plus 2000-Up
  • Requires part KIT-SENSOR-CBL-PDS connector to install on PDS carts

Cross Reference Numbers:

  • DV1-4001
  • DV3-4017
  • 73291-G04 EZ
]]> AMD (Advanced) Golf Cart Motor (3294) for Club Car IQ / Precedent & PD Plus (SepEx), High Speed https://staging.evdrives.com/product/amd-advanced-golf-cart-motor-3294-for-club-car-iq-precedent-pd-plus-sepex-high-speed/ Wed, 13 Aug 2025 17:20:11 +0000 https://staging.evdrives.com/?post_type=product&p=392319 Read more]]>
Features include:
  • Club Car SepEx Motor
  • 5.0 Hp, 3750 at 48 VDC
  • Speeds up to 24 mph on 48 Volts
  • 10 Tooth Female Spline
  • Replaces the D395

When used with stock controller, set a speed code 4.
Cross Reference Part Numbers:

GE D391
GE D390
GE 5BC58JBS6381
GE 5BC58JBS6384


Best Practice Before Buying: remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.
]]> AMD (Advanced) Golf Cart Motor (7146) E-Z-Go (Sepex) DCS & PDS, Stock https://staging.evdrives.com/product/amd-advanced-golf-cart-motor-7146-e-z-go-sepex-dcs-pds-stock/ Wed, 13 Aug 2025 17:20:11 +0000 https://staging.evdrives.com/?post_type=product&p=392363 Read more]]> Features include:

  • E-Z-Go DCS & PDS Shunt Motor
  • 2.25 Hp, 2565 RPM at 36 VDC
  • 19 Tooth Female Spline Replaces 73445G02, 73124G01, DE2-4007
Uses magnet 9636 and speed sensor 6787.  This motor can also be used on DCS cars without a speed sensor.

Best Practice Before Buying: remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.
]]> AMD MOTOR 3.5HP 36V TAYLOR-DUNN https://staging.evdrives.com/product/amd-motor-3-5hp-36v-taylor-dunn/ Wed, 13 Aug 2025 17:20:11 +0000 https://staging.evdrives.com/?post_type=product&p=392317 AMD 36-volt (3.5-hp@2900 rpm), 48-volt (10-hp@1360 rpm) motor with ¾” diameter x 1-¾” long threaded shaft with 3/16″ keyway for Taylor-Dunn. Replaces 70-854-30 & 70-054-00. Same as D385.

Manufacturer & Part Number FOREPAR	6-222 TAYLOR-DUNN XXXX
]]> AMD (Advanced) Golf Cart Motor GG1-4002 (7144) for Club Car IQ / Precedent, PD Plus & i2 (SepEx), Speed & Torque https://staging.evdrives.com/product/amd-advanced-golf-cart-motor-gg1-4002-7144-for-club-car-iq-precedent-pd-plus-i2-sepex-speed-torque/ Wed, 13 Aug 2025 17:20:11 +0000 https://staging.evdrives.com/?post_type=product&p=392362 Read more]]>
Features include:
  • Club Car SepEx Motor
  • 7.0 Hp, 5106 rpm at 48 VDC
  • Speed & Torque Motor
  • 10 Tooth Female Spline
This motor requires an Alltrax DCX500 or DCX600 controller. For best performance, safety and durability, 2 gauge cables throughout the car and heavy-duty solenoid are required.

  • PD-Plus 1997-2001 Regen 2
  • IQ, XRT 2001-2008
  • Precedents 2004-2008
  • i2 with Black Controller or Gray controller 2009 1/2 and Up
Cross Reference Part Numbers:

ADVANCED MOTORS GG1-4002
GE D1163
GE 5BC49JB1163


Best Practice Before Buying: remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.
]]> Motenergy ME-1602 Brush-Type Permanent Magnet DC Motor https://staging.evdrives.com/product/motenergy-me-1602-brush-type-permanent-magnet-dc-motor/ Wed, 13 Aug 2025 17:20:10 +0000 https://staging.evdrives.com/?post_type=product&p=392457 Read more]]> The ME1602 is the same motor as ME1004 but with a shorter 7/8ths shaft. This is the same motors as the ME0708 but it has a double brush set to handle 200 amps continuous. This is a Permanent Magnet, Brush Type, DC Motor with Neodymium Iron Boron Magnets.

Power 6.4 KW continuous @ 48V
16 KW for 1 minute @48V
Voltage 24 – 48 Volts
Speed 3360 rpm at 48V Unloaded
Size 8″ OD, 6.4″ long (w/o shaft)
Shaft 7/8″ x 2.3″, 3/16″ key shaft
Timed for counter-clockwise rotation (can be changed to clockwise)
Weight 30 lbs.
]]> AMD (Advanced) Golf Cart Motor (3265) Taylor-Dunn Industrial Vehicles https://staging.evdrives.com/product/amd-advanced-golf-cart-motor-3265-taylor-dunn-industrial-vehicles/ Wed, 13 Aug 2025 17:20:07 +0000 https://staging.evdrives.com/?post_type=product&p=392520
  • AMD 36-volt (3.5-hp@2900 rpm)
  • 48-volt (10-hp@1360 rpm)
  • Motor with ¾” diameter x 1-¾” long threaded shaft with 3/16″ keyway for Taylor-Dunn.
  • Replaces 70-854-30 & 70-054-00
  • Same as D385
    •  
    Cross Reference Part Numbers:

    FOREPAR 6-222
    TAYLOR-DUNN 70-054-00
    GE D385
    ADVANCED MOTORS BP0-4003
    ADVANCED MOTORS BP1-4004
    ADVANCED MOTORS BP5-4002
    GE 5BC49JB305
    GE 5BC49JB2049
    GE 5BC49JB399

    ]]>         AMD (Advanced) Golf Cart Motor EY7-4001 (3268), E-Z-Go & Yamaha (Sepex), High Torque, Mid-range Speed https://staging.evdrives.com/product/amd-advanced-golf-cart-motor-ey7-4001-3268-e-z-go-yamaha-sepex-high-torque-mid-range-speed/ Wed, 13 Aug 2025 17:20:06 +0000 https://staging.evdrives.com/?post_type=product&p=392390 Read more]]> Features include:

    • SepEx Motor with Regen
    • 12-hp@1300 rpm @ 36 volts – 14-18mph. @ 48V 18-20mph, and 50% increase in torque.
    • Double Brush set (8 brushes total)
    • High torque motor
    • Requires upgraded controller like the DCX500
    • For maximum performance, safety, and durability, a minimum of 4 gauge cables throughout the cart & heavy duty solenoid are required.
    • 19 Tooth Female Spline
    • 10″ housing length, 12″ including the sensor.

    Cross Reference Numbers:

    • AMD XP2140
    • Nivel Part # 3268
    • Similar performance to the D1162
    • GE D1162
    • GE 5BC49JB1162

    Best Practice Before Buying:     remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.
    ]]>