• E-Z-Go DCS & PDS Shunt Motor
• 2.25 Hp, 2565 RPM at 36 VDC
• 19 Tooth Female Spline Replaces 73445G02, 73124G01, DE2-4007

Uses magnet 9636 and speed sensor 6787.  This motor can also be used on DCS cars without a speed sensor. 

• E-Z-Go DCS & PDS Sepex Motor
• 4.45 Hp, 3750 RPM at 36 VDC
• Can also be used with 48 VDC
• 19 Tooth Female Spline

The speed sensor plug on this motor does not match the E-Z-GO PDS motor. Use cable # NP-3228 with OEM and GE controllers. NP-3228 is not needed with the Alltrax controllers.

Cross Reference Part Numbers: ADVANCED MOTORS DE2-4007 ADVANCED MOTORS EV6-4001
FOREPAR EV6-4001 

• SepEx Motor with Regen
• AMD 48V Stock PDS/DCS Shunt Replacement Motor For E-Z-GO
• Fits E-Z-GO PDS Plus 2000-Up
• Requires part KIT-SENSOR-CBL-PDS connector to install on PDS carts

Cross Reference Numbers:

• DV1-4001
• DV3-4017
• 73291-G04 EZ

• SepEx Motor with Regen
• 12-hp@1300 rpm @ 36 volts – 14-18mph. @ 48V 18-20mph, and 50% increase in torque.
• Double Brush set (8 brushes total)
• High torque motor
• Requires upgraded controller like the DCX500
• For maximum performance, safety, and durability, a minimum of 4 gauge cables throughout the cart & heavy duty solenoid are required.
• 19 Tooth Female Spline
• 10″ housing length, 12″ including the sensor.

Cross Reference Numbers:

• AMD XP2140
• Nivel Part # 3268
• Similar performance to the D1162
• GE D1162
• GE 5BC49JB1162

• E-Z-Go Series Motor
• 2.0 Hp, 2800 RPM at 36 VDC
• 19 Tooth Female Spline
• Replaces the D294

Also fits Columbia ParCar, Melex, Yamaha electric G9 (1992½-95) G14, G16. Not for use on PDS or DCS cars.

• E-Z-Go Series Motor
• 4.0 Hp, 4400 RPM at 36 VDC
• Also works on 48 Volts
• 19 Tooth Female Spline
• Replaces the D297

For Columbia and Melex with Dana axle, E-Z-Go 1988-up series cars, Yamaha G14, G16. Speeds up to 20 mph with stock controller. Not for use on PDS or DCS cars.

 Cross Reference Part Numbers: 
ADVANCED MOTORS ES1-4002
FOREPAR 6-224C FOREPAR 10-6244C 

• For E-Z-GO Series
• 8.0 Hp, 1600 RPM at 36 VDC
• 11.4 Hp, 2300 RPM at 48 VDC
• 19 Tooth Female Spline
• Replaces the D294

Cross Reference Part Numbers:

• ADVANCED MOTORS GL0-4001

High Torque motor with 19 spline coupler for E-Z-GO 1988-up series cars. For maximum performance, safety, and durability, 2 gauge cables throughout the car, heavy duty solenoid and F&R switch are requried. Minimum 400 amp controller required. Not for use on DCS or PDS cars

Best Practice Before Buying: remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.

• Fits E-Z-GO Marathon (1989-1994), E-Z-GO TXT/Medalist (1994-Up), Yamaha (Models G8, G9, G14, G16)
• 6.1 Hp, 5330 RPM at 36 VDC, Series motor
• Works well on 48 VDC
• 19 Tooth Female Spline
• Replaces the D398

For E-Z-GO 1988-up series cars. Works great on 48-volts! For maximum performance, safety, and durability, 2 gauge cables throughout the car, heavy duty solenoid and F&R switch are required. Minimum 400 amp controller required.. Not for use on DCS or PDS cars.

Cross Reference Part Numbers:  ADVANCED MOTORS R10-4003 GE D398 GE 5BC48JB3084