Controller Accessories – EV Drives https://staging.evdrives.com Home Page Thu, 14 Aug 2025 00:15:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://staging.evdrives.com/wp-content/uploads/2025/07/evdriveslogo11_1597197500__32796-150x60.webp Controller Accessories – EV Drives https://staging.evdrives.com 32 32 ALLTRAX IQ INTERFACE ADAPTER – INTELLIGENT QUANTUM DRIVE FOR CLUB CAR (2001 TO PRESENT) https://staging.evdrives.com/product/alltrax-iq-interface-adapter-intelligent-quantum-drive-for-club-car-2001-to-present/ Wed, 13 Aug 2025 17:21:23 +0000 https://staging.evdrives.com/?post_type=product&p=390980
  • Alltrax Interface Adapter for the Club Car IQ (Intelligent Quantum) Drive – 2001 to present
  • Works with the DCX300, DCX400, DCX500 & DCX600 Controllers
    • ]]>         Pre Installed Alltrax Interface Adapters for PD PLus to DCX controllers, Club Car Regen 2 https://staging.evdrives.com/product/pre-installed-alltrax-interface-adapters-for-pd-plus-to-dcx-controllers-club-car-regen-2/ Wed, 13 Aug 2025 17:21:23 +0000 https://staging.evdrives.com/?post_type=product&p=390981
  • Alltrax Interface Adapter for the Club Car PD Plus (Power Drive Plus) Regen 2, made in mid 1997 to 2001. (After 2001 – see IQ Adapter)
  • Works with the DCX300, DCX400, DCX500 & DCX600 Controllers
    • ]]>         Reverse Protection Diode 3 AMP, Qty 2 per order https://staging.evdrives.com/product/reverse-protection-diode-3-amp-qty-2-per-order/ Wed, 13 Aug 2025 17:21:23 +0000 https://staging.evdrives.com/?post_type=product&p=390983
  • 3 amp reverse protection diode
  • Qty 2 per order
    • ]]>         REVERSE PROTECTION DIODE 6 AMP https://staging.evdrives.com/product/reverse-protection-diode-6-amp/ Wed, 13 Aug 2025 17:21:23 +0000 https://staging.evdrives.com/?post_type=product&p=390984
  • 6 amp Diode reverse protection diode
  • Replaces MR752 or 6A06
    • ]]>         1264/1268 Adaptor for XCT OEM Controllers https://staging.evdrives.com/product/1264-1268-adaptor-for-xct-oem-controllers/ Wed, 13 Aug 2025 17:21:21 +0000 https://staging.evdrives.com/?post_type=product&p=391056 1264/1268 plug to adapt the Alltrax XCT 23 pin to a Curtis 24 pin.

    ]]>         23-Pin AMP Plug with Pigtail for use with the XCT Yamaha G19 Controllers https://staging.evdrives.com/product/23-pin-amp-plug-with-pigtail-for-use-with-the-xct-yamaha-g19-controllers/ Wed, 13 Aug 2025 17:21:21 +0000 https://staging.evdrives.com/?post_type=product&p=391057 This AMP sealed plug with 2Ft long pigtail for use with the Alltrax XCT G19 motor controllers.

    ]]>         Programming Cable for the Alltrax AXE and DCX Controllers USB-RS232 https://staging.evdrives.com/product/programming-cable-for-the-alltrax-axe-and-dcx-controllers-usb-rs232/ Wed, 13 Aug 2025 17:20:09 +0000 https://staging.evdrives.com/?post_type=product&p=391055 Read more]]> Alltrax Controller Pro Software

    AXE & DCX ControllerPro.exe 

    Build 39 for 2006 and newer
    USB Driver for Win 7 Vista 32 &_64bits
    USB Driver for Win Vista 32 &_64bits
    USB Driver Driver for Win 2000 &_XP
    USB Drive for Win 98
    PDF Controller Programming Interface Drawing
    PDF Controller Pro Instruction Manual
    PDF Technical Note on how to upgrade the Alltrax AXE & DCX Controllers with RS232 Interface
    HPD (ON-OFF)
    High Pedal Disable    		 AXE and DCX Models Only – Prevent motor controller from providing power if throttle is applied prior to Key Switch Turned on
    PLUG BRAKE
    (ON-OFF)    		 AXE “P” models ONLY with A2 terminal lug. Provides Plug Braking proportional to throttle position reaching full “Plugging” (Dynamic Motor Braking) when throttle below 25%.
    TURBO (ON-OFF) Provides higher speed when not in current limit and throttle is at 100%
    1/2 SPEED REVERSE AXE and DCX Models Only – Limits vehicle speed in reverse based on 50% of forward “Top Speed” setting.
    MAX OUTPUT
    CURRENT
    (0-100%)    		 50-100% adjustment limits max current supplied to motor. Used to limit power. (The 400A controller set to 50%=200Amp max)
    UNDER-VOLTAGE Sets the under-voltage where the unit limits power and eventually shuts off and prevents battery damage.
    OVER-VOLTAGE Sets the over-voltage shutoff for the controller during excessive regen or overcharging to prevent damage.
    THROTTLE UP RATE
    (1-15, Default 4)    		 Determines the rate of controller output power based on an increasing throttle input. Setting 1=slow, 15=Fast.
    THROTTLE DOWN RATE
    (1-15 Default 4)    		 Determines the rate of controller output power based on a decreasing throttle input. Setting 1=slow, 15=Fast
    BRAKE CURRENT
    (0-100%)    		 AXE “P” Models – Adjusts the amount of Plug Brake Current as a percentage of 100A of brake current.
    DCX Models – Regeneration Feature is a percentage of possible current available.
    TOP SPEED Sets the top speed as a percentage of top-speed

    Features :

    • Converts a standard 9-pin serial port to USB
    • Complies with USB Specification v1.1(0) & USB CDC v1.1
    • Full Compliance with USB specification v1.1
    • Supports the RS 232 Serial interface (standard 9-pin serial)
    • Supports automatic handshake mode
    • USB full speed communication and Bus Powered
    • Single Cable USB to Serial communication
    • Supports up to 1 Mbps data transfer rate
    • Supports Automatic handshake mode
    • 6 Ft. Length
    • Provides a 96 byte buffer for each upstream and downstream data transfer
    • Drivers and Manual on a CD
    • Easy Installation

    For PC Users

    • Windows® 95/98/98SE, 2000, ME, XP, Vista & 7
    • Available USB port

    Retail Package Content :

    • USB to serial adapter cable
    • Installation & Drivers on CD

    LED Blink Codes:

    At power up the number of green blinks indicates the configured throttle type:
    1 Green = 0-5k
    2 Green = 5k-0
     3 Green = 0-5V
     4 Green = EZ-GO inductive (ITS)
     5 Green = Yamaha 0-1K
     6 Green = Taylor-Dunn 6-10.5V
     7 Green = CLUBCAR 5K-0, 3-wire
    Normal display status:
    Solid Green: Controller ready to run
    Solid Red: Controller in programming mode
    Solid Yellow: Controller throttle is wide open, controller is supplying max output, and is not in current limit.
    Error code display:
    Number of RED blinks indicates any error conditions that might exist.
    1 Red = Throttle Position Sensor Over Range. Check for open wires.
    2 Red = Under Temperature. Controller below -25C.
    3 Red = HPD. Throttle hasn’t gone to zero during this power on cycle.
     4 Red = Over Temperature. Controller over 95C.
     5 Red = unused for series controllers.
    6 Red = Battery Under Voltage detected. Battery V < undervoltage slider.
    7 Red = Battery Over Voltage detected. Battery V > overvoltage slider.
    ]]>         Alltrax Bluetooth Modules for XCT Motor Controllers https://staging.evdrives.com/product/alltrax-bluetooth-modules-for-xct-motor-controllers/ Wed, 13 Aug 2025 17:20:07 +0000 https://staging.evdrives.com/?post_type=product&p=391775 Alltrax Bluetooth Modules for XCT Motor Controllers.

    The user can download a free version of ALLTRAX TOOLKIT APP from Google App Play Store for Android (4.2 or newer) and I-Phone IOS#TBD.

    You must update the controller software to V3.9

    Bluetooth Flyer
    ABT-Flyer-A.pdf

    Bluetooth DWG Asy Bluetooth and System Wires
    Doc102-047-01-H_WIRE-DIA-BLE-XCT-BMS-SOC.pdf

    Bluetooth     Operators Manual
    Doc113-018-H_BLUETOOTH_Operators-Manual.pdf

    Bluetooth     DWG Asy PLS200-002 Box
    Doc102-044-01-H_BLE-PLS200-002-40.pdf

    ]]>         Wire Harness 48V 96-2000 Reg to IQ Controller Conversion https://staging.evdrives.com/product/wire-harness-48v-96-2000-reg-to-iq-controller-conversion/ Wed, 13 Aug 2025 17:20:06 +0000 https://staging.evdrives.com/?post_type=product&p=392522 Wire Harness 48V 96-2000 Reg to IQ Controller Conversion

    Ugrade your older 36v model cart to a 48v Shunt Motor system.

    Make Model Year Power:
    CLUB CAR ALL ELECTRIC 1996 2000

    ]]>         Club Car OBC Harness Extension Jumper https://staging.evdrives.com/product/club-car-obc-harness-extension-jumper/ Wed, 13 Aug 2025 05:38:32 +0000 https://staging.evdrives.com/?post_type=product&p=391066 This harness extends the Club Car OBC (On Board Charge Computer) connections to an aftermarket controller like the Alltrax XCT. This jumper is needed for 2008.5 to 2016 Club Car Precedent vehicles.

    ]]>