Part Number: 622/11240

The 5-pin connector is an added option (not included).

Dimensions Standard:
7.5(L w/ base) x 2.98(W) x 1.70(H) inches
5.6(L) x 2.87(W) x 1.69(H) inches
190(L) x 75.8(W) x 43.3(H) mm

Input Voltage nominal:
24V (V Min. @ V Max.)

Output Current:
The converter will deliver a load current of:
24V to 13.5V, 300-watt, 5-pin

Can be used to charge a battery

Operating Temperature: -25C to +55C

The Sevcon DC/DC Converters are suitable for all electric powered vehicles and are designed to be fitted on-board the vehicle and connected permanently to the battery.

These converters deliver a stable isolated high power, low voltage DC supply for such accessories as lights, horns, and wipers. This eliminates inefficient battery taps and fragile, expensive high voltage accessories.

Additional Features & Benefits

Custom, Compact Design
Custom designed for use with motor controllers, these compact, yet powerful converters can be connected in parallel for higher power requirements to perform reliably in industrial and commercial environments.

Isolated Output
Safer than direct battery connection, these converters provide an electrically isolated output for ancillary equipment.

Stable Voltage
Output is regulated to 13.5V and is maintained regardless of input voltage variations throughout the operating range.

Durable Reliability
Encapsulated to achieve a protection rating to IP67, these converters can be used with complete confidence in the most punishing environments.

For Sevcon Data Sheets, see our FAQ and Documents.

Part Number: 622/11123 (4-pin model)

Same as the 622/11111 and 622/11100 but has a fuse.

Dimensions Standard:
7.5(L w/ base) x 2.98(W) x 1.70(H) inches-
5.6(L) x 2.87(W) x 1.69(H) inches
190(L) x 75.8(W) x 43.3(H) mm

Input Voltage nominal:
36-48V DC

Output Current:
The converter will deliver a load current of:
12V Volts @ 300 Watts, 25 Amps
Light load 13.5 Volts

Can be used to charge a battery

Operating Temperature: -25C to +55C

The Sevcon DC/DC Converters are suitable for all electric powered vehicles and are designed to be fitted on-board the vehicle and connected permanently to the battery.

These converters deliver a stable isolated high power, low voltage DC supply for such accessories as lights, horns, and wipers. This eliminates inefficient battery taps and fragile, expensive high voltage accessories.

Additional Features & Benefits

Compact Design
Custom designed for use with motor controllers, these compact, yet powerful converters can be connected in parallel for higher power requirements to perform reliably in industrial and commercial environments.

Stable Voltage
Output is regulated to 13.5V and is maintained regardless of input voltage variations throughout the operating range.

Durable Reliability
Encapsulated to achieve a protection rating to IP67, these converters can be used with complete confidence in the most punishing environments.

For Sevcon Data Sheets, see our FAQ and Documents.

Part Number: 622/11201

The 5-pin connector is an added option (not included).

Dimensions Standard:
7.5(L w/ base) x 2.98(W) x 1.70(H) inches
5.6(L) x 2.87(W) x 1.69(H) inches
190(L) x 75.8(W) x 43.3(H) mm

Input Voltage nominal:
48V (28.8V Min. @ 60V Max.)

Output Current:
The converter will deliver a load current of:
48V to 12V @ 300W, 20.4 amps
Light load 13.5 Volts

Can be used to charge a battery

Operating Temperature: -25C to +55C

The Sevcon DC/DC Converters are suitable for all electric powered vehicles and are designed to be fitted on-board the vehicle and connected permanently to the battery.

These converters deliver a stable isolated high power, low voltage DC supply for such accessories as lights, horns, and wipers. This eliminates inefficient battery taps and fragile, expensive high voltage accessories.

Additional Features & Benefits

Custom, Compact Design
Custom designed for use with motor controllers, these compact, yet powerful converters can be connected in parallel for higher power requirements to perform reliably in industrial and commercial environments.

Isolated Output
Safer than direct battery connection, these converters provide an electrically isolated output for ancillary equipment.

Stable Voltage
Output is regulated to 13.5V and is maintained regardless of input voltage variations throughout the operating range.

Durable Reliability
Encapsulated to achieve a protection rating to IP67, these converters can be used with complete confidence in the most punishing environments.

For Sevcon Data Sheets, see our FAQ and Documents.

Part Number: 622/11086 (4-Pin model)

This is the replacement for the 622/11082 model used on the Ford Think cars.

The 4-pin connector is an added option (not included).

Dimensions Standard:
7.5(L w/ base) x 2.98(W) x 1.70(H) inches-
5.6(L) x 2.87(W) x 1.69(H) inches
190(L) x 75.8(W) x 43.3(H) mm

Input Voltage nominal:
72/80V (57.6V min. @ 100V Max.)

Output Current:
The converter will deliver a load current of:
12 Volts @ 300 Watts, 24 Amps
Light load 13.5 Volts

Can be used to charge a battery

Operating Temperature: -25C to +55C

The Sevcon DC/DC Converters are suitable for all electric powered vehicles and are designed to be fitted on-board the vehicle and connected permanently to the battery.

These converters deliver a stable isolated high power, low voltage DC supply for such accessories as lights, horns, and wipers. This eliminates inefficient battery taps and fragile, expensive high voltage accessories.

Additional Features & Benefits

Custom, Compact Design
Custom designed for use with motor controllers, these compact, yet powerful converters can be connected in parallel for higher power requirements to perform reliably in industrial and commercial environments.

Isolated Output
Safer than direct battery connection, these converters provide an electrically isolated output for ancillary equipment.

Stable Voltage
Output is regulated to 13.5V and is maintained regardless of input voltage variations throughout the operating range.

Durable Reliability
Encapsulated to achieve a protection rating to IP67, these converters can be used with complete confidence in the most punishing environments.

For Sevcon Data Sheets, see our FAQ and Documents.

Part Number: 622/11202

300 Watt

Input Voltage nominal:
72/80V (57.6V min. @ 100V Max.)

Dimensions Standard:
7.5(L w/ base) x 2.98(W) x 1.70(H) inches-
5.6(L) x 2.87(W) x 1.69(H) inches
190(L) x 75.8(W) x 43.3(H) mm

Output Current:
The converter will deliver a load current of:
12 Volts @ 300 Watts, 24 Amps
Light load 13.5 Volts

Can be used to charge a battery

Operating Temperature: -25C to +55C

The Sevcon DC/DC Converters are suitable for all electric powered vehicles and are designed to be fitted on-board the vehicle and connected permanently to the battery.

These converters deliver a stable isolated high power, low voltage DC supply for such accessories as lights, horns, and wipers. This eliminates inefficient battery taps and fragile, expensive high voltage accessories.

Additional Features & Benefits

Custom, Compact Design
Custom designed for use with motor controllers, these compact, yet powerful converters can be connected in parallel for higher power requirements to perform reliably in industrial and commercial environments.

Isolated Output
Safer than direct battery connection, these converters provide an electrically isolated output for ancillary equipment.

Stable Voltage
Output is regulated to 13.5V and is maintained regardless of input voltage variations throughout the operating range.

Durable Reliability
Encapsulated to achieve a protection rating to IP67, these converters can be used with complete confidence in the most punishing environments.

For Sevcon Data Sheets, see our FAQ and Documents.

Part Number: 622/11213

This is the 500 Watt version of the 622/11202.

Dimensions Standard:
7.5(L w/ base) x 2.98(W) x 1.70(H) inches-
5.6(L) x 2.87(W) x 1.69(H) inches
190(L) x 75.8(W) x 43.3(H) mm

Input Voltage Nominal:
80V (57V min. @ 100V Max.)

Output Current:
The converter will deliver a load current of:
12 Volts @ 500 Watts @ 40 amps
Light load 13.4 Volts

Can be used to charge a battery

Operating Temperature: -25C to +55C

The Sevcon DC/DC Converters are suitable for all electric powered vehicles and are designed to be fitted on-board the vehicle and connected permanently to the battery.

These converters deliver a stable isolated high power, low voltage DC supply for such accessories as lights, horns, and wipers. This eliminates inefficient battery taps and fragile, expensive high voltage accessories.

Additional Features & Benefits

Custom, Compact Design
Custom designed for use with motor controllers, these compact, yet powerful converters can be connected in parallel for higher power requirements to perform reliably in industrial and commercial environments.

Isolated Output
Safer than direct battery connection, these converters provide an electrically isolated output for ancillary equipment.

Stable Voltage
Output is regulated to 13.5V and is maintained regardless of input voltage variations throughout the operating range.

Durable Reliability
Encapsulated to achieve a protection rating to IP67, these converters can be used with complete confidence in the most punishing environments.

For Sevcon Data Sheets, see our FAQ and Documents.

Molex connector for mating with Sevcon 4 pin DC-DC Converters. Includes tinned 10-12 gauge copper pins.

Sevcon PN 661/27082

Molex connector for mating with Sevcon 5 pin DC-DC Converters. Includes tinned 10-12 gauge copper pins.

Secon PN 661/27093